You are here: Home » Ending » Finished Giveaways » LightKeeper Pro Review & Giveaway

LightKeeper Pro Review & Giveaway

Press Sample

Have you ever put up your Christmas lights only to find that one of the sections is burned out?   Well instead of throwing the strand of lights away, there is a new product that will help you fix the lights and save you the hassle of having to buy another strand of lights….Lightkeeper Pro


Americans will spend millions of dollars this year replacing broken holiday light sets, but they don’t have to because there’s a solution that will save time, money and stress. Whether dealing with a faulty single strand of lights or a pre-lit tree that’s only half lit, LightKeeper Pro® from Ulta-Lit Technologies can quickly solve most light set problems.

How the LightKeeper Pro Works


Fixes most light sets in seconds using the Quick Fix Trigger

Most miniature Holiday Light set failures occur when an individual bulb “shunt” fails to energize. These shunts are energized when a filament burns out. This causes a section of lights, usually 35 or 50, to go out instead of just one light bulb. This is because miniature light sets are wired in “series” and electricity must flow through each bulb, to the next, for them to light.The LightKeeper Pro Quick Fix Trigger sends a shaped, electrical pulse through the defective bulb, clearing the shunt. This allows it to operate properly. The current can then flow through the light set completing the circuit and illuminating the other bulbs.

The Patented LightKeeper Pro is the first product to FIX defects in a light set with the squeeze of a trigger.

Keep lights going and glowing despite a burned out bulb

Each wall plug has a “Hot”, “Neutral” and “Ground” contact. Electricity is powered from the “Hot” contact and flows through the lights. It is similar to water flowing in a pipe. The LightKeeper Pro Continuity Detector/Voltage Detector uses an IC (Integrated Circuit) chip to find where the flow of electricity stops. It does this by detecting the minute electrical field emanating from the “Hot” wire even when a defect has caused the lights to go out. This electrical field when detected by the LightKeeper Pro, starts the beeping sound and continues as you scan the light string. When the electrical field stops emanating at the defect, the beeping stops. This shows where the problem is in miniature, series light strings. The detector finds the problem spot but the bulb or socket needs to be checked and appropriate repair action taken. The repair action may be securing a loose bulb, or testing a bulb to identify if it needs to be replaced.

My take:  Ok this product is pretty cool…everything is included and it is simple to use.  First you remove a bulb that is not working, place the LightKeeper Pro in the empty bulb socket and pull the trigger several times.  Chances are that will fix the problem and the light strand will start to work again.  If you have a defective bulb the LightKeeper Pro has a built in audible voltage detector that can locate the defective bulb.  This product even comes with extra bulbs so you can replace the defective bulb and there is a storage compartment.  I am also impressed that there is a storage compartment for those extra bulbs so you don’t misplace them.  For $20, this is a great value!  Note this product does not work on LED lights.

3  lucky MommyPR readers will win their very own LightKeeper Pro!

Win It

Mandatory Entry:

Tell me….do you currently have a strand of lights that don’t work? 

Extra Entries:

Follow LightKeeper Pro on Facebook

Follow LightKeeper Pro on Twitter

Follow MommyPR on Twitter

Follow MommyPR on Facebook

Enter (or leave a comment) on any other of our Holiday Gift Guide  posts

(Leave me the title, entry per each giveaway entered, only good on Holiday Posts

See the Contest Rules for even more Entries!

Share this giveaway on your blog, facebook or twitter with a link to MommyPR and get an extra entry for each that you do daily.

Open to US residents only

Contest ends 11:59 pm Pacific Time on 12/27/13

See Contest Rules for More Entries


Press Sample

Some information may have been used from the sponsors website, PR, or other provided material. (Giveaways- Odds of winning depend on the number of entries vs prizes. No purchase is ever needed or endorsed for an entry) The views and opinions expressed in this blog are purely my own and any product claim, statistic, quote or other representation about a product or service should be verified by the above mentioned store, PR,or product designer. This post is not endorsed, sponsored or has any connection to twitter, facebook or any other network. This post is solely the property of Mommy PR and/or its above sponsor.

About the Author My name is Andrea and I have 2 boys (5&7), a baby girl who is 1 years old, a wonderful husband, and 1 kitty. I am blessed to be able to stay at home with the kids 3 days a week and work as a physical therapist 2 days a week.

Comments (37)

Trackback URL | Comments RSS Feed

  1. Ashley S says:

    I actually had 3 strands not working this year.. ugg!

  2. Ashley S says:

    Follow MommyPR on Twitter @rookieabs

  3. Amanda Hoffman says:

    yes i do have a few that dont work

  4. Karen Medlin says:

    I have quite a few strands of lights that do not work. I keep them and keeping telling myself I will fix them after the holidays and the end up getting packed up in the bins for next year to fix.

  5. Karen Medlin says:

    Follow LightKeeper Pro on Facebook-Gumma Medlin

  6. Karen Medlin says:

    Friday bonus-

  7. Karen Medlin says:

    2 Friday bonus-

  8. Karen Medlin says:

    MommyPR You Tube Subscriber-Karen Medlin

  9. Karen Medlin says:

    MommyPR +1 Follower-Karen Medlin

  10. Karen Medlin says:

    MommyPR twitter follower-gummasplace

  11. Karen Medlin says:

    MommyPR Stumble Follower-karenmed409

  12. Karen Medlin says:

    Have your button, right side

  13. Karen Medlin says:

    MommyPR Pinerest Follower-Gumma Medlin

  14. Karen Medlin says:

    Follow MommyPR on Facebook-Gumma Medlin

  15. Karen Medlin says:

    MommyPR feed email subscriber

  16. Karen Medlin says:


  17. Karen Medlin says:


  18. I have MULTIPLE strands of lights that don’t work!

    coriwestphal at msn dot com

  19. I’m subscribed to you via YouTube: cwestphal2

    coriwestphal at msn dot com

  20. I follow via FB Networked Blogs: Cori Eckstrom Westphal

    coriwestphal at msn dot com

  21. I follow you on Twitter @coriwestphal (

    coriwestphal at msn dot com

  22. I added you to my Google+ circle (following): Cori Westphal (

    coriwestphal at msn dot com

  23. I follow you on Pinterest: coriwestphal (

    coriwestphal at msn dot com

  24. I’m an email subscriber, coriwestphal at msn dot com.

    coriwestphal at msn dot com